content is empty!
content is empty!
Using G03 PE as raw material, and printing logo with high temperature resistant printing ink, the film won’t get break or distortation under 180℃.
Technical parameters
Model | Raw material | Thickness (mm) | Color | Peeling strength (KN/m) | Tensile strength(%) | Elongation at break (%) | Temperature toleration |
Low stickiness | PE | 0.016-0.03 | Transparent | 0.03 – 0.05 | 21 - 32 | 80 - 90 | ≤180℃ |
High stickiness | PE | 0.016-0.03 | Transparent | 0.05 - 0.07 | 21 - 44 | 80 - 100 | ≤180℃ |
Specification
Thickness (mm) | Width (mm) | Length (m) | Inner core (mm) | ||||
specification | tolerance | specification | tolerance | specification | tolerance | specification | tolerance |
0.016– 0.03 | ± 0.005 | 20 - 1800 | ±1 | 50 - 500 | Not less than displayed | 76 | +1 0 |
Note: Special specification can be as per customers’ need.
Tehncial characteristics
Stickiness test: Easy to stick on surface, easy to peel.
A. Can be bent 90°with LOGO, no break, no shedding
B. After Pittsburgh test on painting film, there is no residual glue on painting film, not affect painting film.
Loading test: test under 360h 25℃- 50℃, there is no residual glue on surface.
UV-resistance aging test: There is no break or deformation after 60 hours UV lamp(300W) exposure under 50℃.
Heat and moisture resistant aging test: The film does not shed in the condition of 200℃for 3 minutes, no residual glue, and no corrosion to surface.
Sticking requirement: Surface to be sticked must be dust-free and oil-free.
Using G03 PE as raw material, and printing logo with high temperature resistant printing ink, the film won’t get break or distortation under 180℃.
Technical parameters
Model | Raw material | Thickness (mm) | Color | Peeling strength (KN/m) | Tensile strength(%) | Elongation at break (%) | Temperature toleration |
Low stickiness | PE | 0.016-0.03 | Transparent | 0.03 – 0.05 | 21 - 32 | 80 - 90 | ≤180℃ |
High stickiness | PE | 0.016-0.03 | Transparent | 0.05 - 0.07 | 21 - 44 | 80 - 100 | ≤180℃ |
Specification
Thickness (mm) | Width (mm) | Length (m) | Inner core (mm) | ||||
specification | tolerance | specification | tolerance | specification | tolerance | specification | tolerance |
0.016– 0.03 | ± 0.005 | 20 - 1800 | ±1 | 50 - 500 | Not less than displayed | 76 | +1 0 |
Note: Special specification can be as per customers’ need.
Tehncial characteristics
Stickiness test: Easy to stick on surface, easy to peel.
A. Can be bent 90°with LOGO, no break, no shedding
B. After Pittsburgh test on painting film, there is no residual glue on painting film, not affect painting film.
Loading test: test under 360h 25℃- 50℃, there is no residual glue on surface.
UV-resistance aging test: There is no break or deformation after 60 hours UV lamp(300W) exposure under 50℃.
Heat and moisture resistant aging test: The film does not shed in the condition of 200℃for 3 minutes, no residual glue, and no corrosion to surface.
Sticking requirement: Surface to be sticked must be dust-free and oil-free.