content is empty!
content is empty!
Using PE as raw material, we manufacture PE film with different stickness for different Logo materials, it can be applied to PVC panel, PET, acrylic and glass, etc.
Technical parameters
Model | Raw material | Thickness (mm) | Color | Peeling strength (KN/m) | Tensile strength(%) | Elongation at break (%) | Temperature toleration |
Low stickiness | PE | 0.03-0.04 | Transparent / Blue | ≤0.01 | 600 - 750 | 150 - 165 | ≤60℃ |
Medium stickiness | PE | 0.03-0.04 | Transparent / Blue | 0.01 - 0.03 | 600 - 900 | 150 - 100 | ≤60℃ |
High stickiness | PE | 0.03-0.04 | Transparent / Blue | 0.03 - 0.04 | 600 -1000 | 150 - 200 | ≤60℃ |
Specification
Thickness (mm) | Width (mm) | Length (m) | Inner core (mm) | ||||
specification | tolerance | specification | tolerance | specification | tolerance | specification | tolerance |
0.03 – 0.08 | ± 0.005 | 20 - 1800 | ±1 | 50 - 500 | Not less than displayed | 76 | +1 0 |
Note: Special specification can be as per customers’ need.
Tehncial characteristics
Stickiness test: Easy to stick on surface, easy to peel.
A. Can be bent 90°with LOGO, no break, no shedding
B. After Pittsburgh test on painting film, there is no residual glue on painting film, not affect painting film.
Loading test: test under 360h 25℃- 50℃, there is no residual glue on surface.
UV-resistance aging test: There is no break or deformation after 60 hours UV lamp(300W) exposure under 50℃.
Heat and moisture resistant aging test: 60℃+80%=240H, no residual glue, and no corrosion to surface.
Sticking requirement: Surface to be sticked must be dust-free and oil-free.
Using PE as raw material, we manufacture PE film with different stickness for different Logo materials, it can be applied to PVC panel, PET, acrylic and glass, etc.
Technical parameters
Model | Raw material | Thickness (mm) | Color | Peeling strength (KN/m) | Tensile strength(%) | Elongation at break (%) | Temperature toleration |
Low stickiness | PE | 0.03-0.04 | Transparent / Blue | ≤0.01 | 600 - 750 | 150 - 165 | ≤60℃ |
Medium stickiness | PE | 0.03-0.04 | Transparent / Blue | 0.01 - 0.03 | 600 - 900 | 150 - 100 | ≤60℃ |
High stickiness | PE | 0.03-0.04 | Transparent / Blue | 0.03 - 0.04 | 600 -1000 | 150 - 200 | ≤60℃ |
Specification
Thickness (mm) | Width (mm) | Length (m) | Inner core (mm) | ||||
specification | tolerance | specification | tolerance | specification | tolerance | specification | tolerance |
0.03 – 0.08 | ± 0.005 | 20 - 1800 | ±1 | 50 - 500 | Not less than displayed | 76 | +1 0 |
Note: Special specification can be as per customers’ need.
Tehncial characteristics
Stickiness test: Easy to stick on surface, easy to peel.
A. Can be bent 90°with LOGO, no break, no shedding
B. After Pittsburgh test on painting film, there is no residual glue on painting film, not affect painting film.
Loading test: test under 360h 25℃- 50℃, there is no residual glue on surface.
UV-resistance aging test: There is no break or deformation after 60 hours UV lamp(300W) exposure under 50℃.
Heat and moisture resistant aging test: 60℃+80%=240H, no residual glue, and no corrosion to surface.
Sticking requirement: Surface to be sticked must be dust-free and oil-free.